LAUNCH Touch Pro Elite All Systems Diagnosis Tool Automotive Scanner Support Service Functions Automotive
LAUNCH CRP TOUCH PRO ELITE is compatible with obd2 functions for emission-related issues and full systems diagnoses for detecting related trouble codes in time. In conformity with the Oil/EPB/SAS/BMS DPF reset, Throttle Adaptation, and ABS Bleeding service, this diagnostic Android tablet is ideal for DIYers, home mechanics, and small auto repair shops.
7 Most-Commonly Used Service Functions
1. Oil Reset:
Allow you to reset a new engine Oil Life system calculation once the oil is changed.
2. SAS Service:
Help clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
3. EPB Service:
Reset the new electronic parking brake to maintain the electronic braking system’s safety and efficiency.
4. BMS Reset:
Perform a reset on the vehicle battery to clear the fault information and re-match the battery.
5. DPF Service:
Clear particulate matter from the DPF filter to stabilize the filter performances.
6. Throttle Adaptation:
Initialize the throttle actuators to the default state for accurately regulating throttle (or idle engine) operations.
7. ABS Bleeding:
Get a firm brake pad after air exhaustion.
All System Diagnostics
LAUNCH TOUCH PRO Elite goes beyond identifying the source of the check engine light.
Unlike normal OBDII code readers who cannot catch all engine issues, this scan tool can get access to all available electronic modules in a vehicle to get a complete health status picture of different components, including:
| Engine | Transmission | Airbag | ABS | ESP | TPMS | Immobilizer | Gateway | Steering | Radio | Air Conditioning, and more.
Full 10 Mode OBDII/EOBD/JOBD Car Diagnostics Functions:
This scanner supports all 10 test modes for OBD-II cars, which are great for daily repair work. The table below describes the purpose of each mode of operation:
1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and storing freeze frame data.
4.I/M Readiness Status: This shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data: Check the vehicle conditions recorded by the onboard computer when the emission-related fault occurs.
7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Support 43 Brands – All Systems Diagnosis
for Audi, Benz, BMW, Citroen, Dacia, EU-Ford, Fiat, Jaguar, Lancia, LandRover, Mini, Opel, Peugeot, Porsche, Renault, Romeo, Saab, Seat, Skoda, Sprinter, Vauxhall, Volvo, VW
Acura, Daewoo, Honda, Hyundai, Infiniti, JP-Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Smart, Subaru, Suzuki, Toyota
Chrysler, GM, US-Ford
As soon as you plug in the LAUNCH TOUCH PRO Elite, it will automatically detect the car to show you the make, model, year, and (in some cases) vehicle mileage, for quick and accurate identification.
After that, it will lead you to diagnostics, where you can choose the systems to scan.
Battery Voltage Detection
Once the LAUNCH TOUCH PRO Elite scan tool has identified the car, it will start doing an automatic scan while displaying the battery monitor at the top.
Battery monitoring shows the actual voltage of your car battery.
One-Click Online Update
One of the handiest features of this OBD2 scanner is its one-click Wi-Fi update.
Data Record & Replay
It allows you to record printable diagnostic reports.
Additionally, you can playback the data at a later time. If you’re a mechanic and a customer claims the code wasn’t there before, you can pull out the history and show them the code and when it first appeared.
Feedback for Quick Help
You can get quick help from the “Feedback” function.
Not all vehicle problems are easy to diagnose. A strong technical support team from LAUNCH can help you solve tricky repairs and issues and share general knowledge to help you use the scan tool more effectively.
Update and Warranty
One Year Free Update.
OS: Android 7.0
CPU: Quad-Cord 1.5 GHz
Display: LCD 5-Inch, 720P
Screen Size: 5″ TFT color
Operating Voltage: 9~18V
Dimension: 245*123.5*36.8 mm (9.64*4.86*1.45 inches)
Length: 1200 mm (47.24 inches)
Net Weight: <600 g (21.16 oz)